Speakers are a major component in any home theater, but the sound quality can be dramatically improved by hooking them up to an amplifier.
And if you’re going for Klipsch speakers, you’ll need a power amp with at least 50 watts of RMS per channel.
Here you can choose the best amplifiers for Klipsch speakers:

Yamaha Audio A-S1200BL
RANK
Best Overall

Marantz AV Receiver SR7013
RANK
Best Receiver

Crown XLS2002
RANK
Best Value
Yamaha Audio A-S1200BL – Best Amplifier for Klipsch Speakers Overall

🎼 PANDARANK | 9/10 |
Number of Channels | 2 |
Output Power | 90 W at 8 Ohms / 20 Hz to 20 kHz / 0.07% THD 150 W at 4 Ohms |
Speaker Connectors: | 4 x Binding Post Pair |
Wi-Fi / Bluetooth | No |
📢 The number of channels on this amplifier is two, though the 2 channels are only stereo. With this, you’ll be able to connect two speakers that are 4 ohms. This amplifier is therefore perfect not only for Klipsch speakers but also for other brands of speakers.
🔊 The output power is 90 watts (8 ohms) and 150 watts (4 ohms), which means it is very efficient when driving most Klipsch speakers, and produces a lot of volumes and great audio quality. This amplifier can drive any speaker under 150 watts.
🔌 This amplifier has 6 RCA input channels and 2 RCA output channels (L/R). This means that you can connect two speakers with 8(4) ohms and a subwoofer with 4 ohms.
Overall, this amplifier is the best for Klipsch speakers because it provides good sound quality, and output power, and can drive any speaker under 150 watts.
Marantz AV Receiver SR7013 – Best Receiver for Klipsch Speakers Overall

🎼 PANDARANK | 9.8/10 |
Number of Channels | 9.2 |
Output Power | 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) |
Speaker Connectors: | 11 x Binding Post Pair |
Wi-Fi / Bluetooth | Wi-Fi 4 (802.11n); Dual-Band (2.4 & 5 GHz) BT 3.0 + EDR |
🔊 Featuring discrete high-current power amplifiers on all channels, the Marantz SR7013 delivers 125 watts of power per channel (8 Ohm, 20 Hz – 20 kHz, 0.08% 2ch drive). With low impedance drive capability, it offers operational stability with a wide range of speakers for balanced, quality sound.
📣 To enjoy the immersive 3D sound, you can set up a 7.1.2 or 5.1.4 3D experience without the need for an external amplifier or expand to 7.1.4 with an additional two-channel amp.
🔌 This receiver has plenty of inputs and outputs for all sorts of connections, both wired and wireless. You can find out about the connectors you are interested in from the picture below.

- A Bluetooth/wireless LAN antenna connector
- DC OUT jacks
- Digital audio connectors (DIGITAL AUDIO)
- RS-232C connector
- FLASHER IN jack
- SIGNAL GND terminal
- NETWORK connector
- REMOTE CONTROL jacks
- Video connectors (VIDEO)
- HDMI connectors
- AC inlet (AC IN)
- FM/AM antenna terminals (ANTENNA)
- Analog audio connectors (AUDIO)
- 7.1-channel input connectors (7.1CH IN)
- Speaker terminals (SPEAKERS)
- PRE OUT connectors
- Component video connectors (COMPONENT VIDEO)
The Marantz SR7013 is the perfect receiver for Klipsch speakers. It has a high-quality speaker amplifier, an 9.2-channel surround sound setup, and Wi-Fi for easy access. It’s also the best receiver for Klipsch speakers with great construction in mind!
Crown XLS2002 – Best Value Amplifier for Klipsch Speakers

🎼 PANDARANK | 9.0/10 |
Number of Channels | 2 |
Output Power | 4 Ohms: 650 W per Channel 8 Ohms: 375 W per Channel |
Speaker Connectors: | 2 x XLR Input 1 x 2RCA Input 2 x 1/4″ Thru 2 x Binding Post Pair Output 2 x speakON NL4 Output |
Wi-Fi / Bluetooth | No |
The Crown XLS2002 is a mighty amplifier that will not just satisfy your needs, but make your music sound flawless.
🔊 It has 2 channels. It has an output power of 650W at 4Ω, and 375W at 8Ω per channel, which is perfect for Klipsch speakers and any other speaker out there. It is one of the most powerful amplifiers on the market and will make your sound come to life.
This amp has an excellent frequency response which ranges between 20 Hz and 20 kHz at +-1dB, which means that your music will sound almost flawless, and not artificial at all.
🔌 Thanks to the availability of various types of input and output connectors (RCA, ¼”, XLR, Speakon, and terminals for connecting wires directly) located on the rear side of the amplifier, connecting speakers has become much easier and can be done in several modes (Bridge, stereo mode or parallel connection).
The Crown XLS2002 is one of the best amplifiers for Klipsch speakers. It is very powerful and will make your sound come to life. This means that it is a great amplifier for Klipsch speakers and that you should definitely get it if you want to improve your sound.
Sony STR-DN1080 – Runner-up Receiver

🎼 PANDARANK | 9.7/10 |
Number of Channels | 7.2 |
Output Power | 165 W (6 ohms, 1 kHz, 1ch driven THD 0.9%) 130 W (8 ohms) |
Speaker Connectors: | 9 x Binding Post Pairs |
Wi-Fi / Bluetooth | Bluetooth® NFC Wi-Fi® AirPlay |
📣 Sony STR-DN1080 is a 5.1.2 (or 7.1) channel device with support for Dolby Atmos and DTS:X. As a positive point, this model has six HDMI inputs, while in most competing devices their number is reduced to four.
In addition, the Sony STR-DN1080 has two HDMI outputs, which means it is capable of delivering 4K video and surround sound to two different living areas. The rest of the connectivity options are quite modest: optical and coaxial inputs, Bluetooth, as well as Wi-Fi, and Ethernet.
🔊 The output power of the Sony STR-DN1080 is 130W x 7 channels, which is a very nice amount. This means that you will have no problem getting clear and degressive sound from your speaker system.
🔌 Like most receivers, Sony has many connectors, a list of which is given below:
Inputs: | Outputs: |
---|---|
6 x HDMI 1 x Digital Coaxial 1 x Optical TOSLINK 2 x RCA Composite 4 x Stereo RCA 1 x 1/8″ / 3.5 mm Setup Mic Input 1 x RJ45 (Ethernet) 1 x FM Antenna Terminal 1 x 1/8″ / 3.5 mm (IR) Input | 2 x HDMI 1 x RCA Composite 2 x RCA Subwoofer Pre-Out 1 x Stereo RCA Zone 2 1 x 1/4″ / 6.35 mm Headphone Output 1 x 1/8″ / 3.5 mm (IR) Output |
Speaker Connectors: 9 x Binding Post Pairs |
The DN1080 receiver includes Bluetooth, Wi-Fi, AirPlay, Chromecast, and Spotify Connect for streaming services. It’s DLNA certified for music from your NAS or laptop.
If you are wondering which is the best amplifier for Klipsch speakers then you have definitely come to the right place. The Sony Str-DN1080 is one of the most popular receivers in this brand and it has everything that anyone needs to get a great sound from a home theater.
YAMAHA RX-A2A AVENTAGE – Best Amplifier for Klipsch Speakers

🎼 PANDARANK | 9.2/10 |
Number of Channels | 7.2 |
Output Power | 100 W at 8 Ohms / 20 Hz to 20 kHz / 0.06% THD |
Speaker Connectors: | 9 x Binding Post Pairs |
Wi-Fi / Bluetooth | Wi-Fi BT SBC, AAC |
Choosing a receiver for your Klipsch speakers can be confusing, as there are many receivers offering very different features. The Yamaha AVENTAGE RX-A2A will give you that higher-quality sound you want to hear in a rich home theater or music system.
📣 This receiver offers 7.1 channels of surround sound with its built-in Dolby Atmos and DTS:X audio decoding. This gives you the power to enjoy a full home theater experience.
🔊 The Yamaha AVENTAGE RX-A2A has a maximum output power of 100 watts per channel at 8 ohms. This is the amount of power needed to power your speakers at full capacity.
It has a frequency response of 20Hz – 20kHz. This range is broad enough to allow you to hear everything in your movie or music, without compromising audio quality.
🔌 There are several different types of inputs you can use to connect your home theater receiver. The Yamaha AVENTAGE RX-A2A has 7 HDMI, and 2 digital. This means you will be able to connect a variety of devices to your receiver, including your DVD player, cable or satellite box, or gaming console.
If you are looking for an amplifier that will allow you to connect all of your devices and enjoy the higher-quality sound of Klipsch speakers, the Yamaha AVENTAGE RX-A2A will be a great match.
Cambridge Audio CXA81 – Best Amplifier for Klipsch Speakers with Bluetooth

🎼 PANDARANK | 9.3/10 |
Number of Channels | 2 |
Output Power | Up to 80 W per channel RMS at 8 ohms Up to 120 W per channel RMS at 4 ohms |
Speaker Connectors: | 4 x Binding Post Pairs |
Wi-Fi / Bluetooth | No |
📢 The Cambridge Audio CXA81 is without a doubt one of the best amplifiers you can buy for your Klipsch speakers. This amplifier has been manufactured with the speaker’s sound quality in mind and will deliver nothing but clean and pure audio through your speakers.
This model is a stereo amplifier, which means that it has 2 channels for you to adjust the sound levels. This will allow you to pair it with a couple of speakers and get the best audio quality.
🔊 This Cambourne Audio CXA81 boasts an impressive 80 watts per channel at 8 ohms and 120 watts at 4 ohms. This is more than enough for speakers such as Klipsch R-50M, RP-640D, R-41SA, RP-500SA, RP-240D, and others.
This amplifier has a frequency response of 5Hz to 60kHz, which is pretty good. This will ensure that you can get the best audio range out of your speakers.
You can stream wirelessly to this amplifier via Bluetooth from your smartphone or device.
🔌 This amplifier comes with a range of inputs that will allow you to connect your audio devices and play music through your speakers. These include 2 x Optical TOSLINK, 1 x Digital Coaxial, 4 x Stereo RCA, 1 x USB Type-B, and 1 x 1/8″ / 3.5 mm.
This amplifier also comes with an output that allows you to plug in your speakers via 1 x Stereo RCA, 1 x RCA Subwoofer, and 1 x 1/8″ / 3.5 mm headphones.
The Cambridge Audio CXA81 is a great amplifier that will allow you to take full advantage of Klipsch speakers and their amazing audio quality.
Denon AVR-S750H – Best Value Receiver for Klipsch Speakers

🎼 PANDARANK | 9.5/10 |
Number of Channels | 7.1 |
Output Power | 75 W (8 ohm, 20 Hz – 20 kHz, 0.08% 2ch Drive) 110 W (6 ohm, 1 kHz, 0.7% 2ch Drive) |
Speaker Connectors: | 7 x Binding Post Pairs |
Wi-Fi / Bluetooth | Bluetooth® Wi-Fi® AirPlay |
📢 The Denon AVR-S750H AV receiver has modern functionality at a low cost. It delivers superior sound in a small room and is compatible with the latest HDMI specifications, along with the latest HDCP 2.3 version required for full playback of 4K/UltraHD content.
🔊 With 7.1 channel surround processing and 75W per channel at 8 ohms and 110W at 6 ohms. It provides the extra oomph you’ll need to get the most out of all your home cinema equipment.
📣Use all seven channels in a 5.1.2 Dolby Atmos® or DTS:X™ system. Or go with a traditional 5.1-channel setup, and repurpose the extra two channels for music in another zone.
📶 The receiver also supports wireless connection via Bluetooth or Apple AirPlay 2, as well as Amazon Alexa and Google Assistant voice control technologies. With the free HEOS smartphone app, you can access hundreds of internet radio stations and music streaming services from Spotify®, Deezer, Tidal, and more.
The Denon AVR-S750H is a very nice choice for anyone looking to get an amplifier that will work well with their Klipsch speakers. It’s also a good choice if you want to use it with other types of speakers, and it’s definitely worth the price tag.
Monoprice Monolith 7 – Best Amplifier for Klipsch Speakers with Multi-Channel

🎼 PANDARANK | 9.1/10 |
Number of Channels | 7 |
Output Power | 200 W at 8 Ohms / 20 Hz to 20 kHz 300 W at 4 Ohms |
Speaker Connectors: | 7x unbalanced RCA 7x balanced XLR |
Wi-Fi / Bluetooth | No |
📢 Monolith by Monoprice 7 is one of the best amplifiers for Klipsch speakers, which features a number of channels and power.
🔊 The Monolith 7 is a great-looking amp with a chassis and aluminum faceplate that has an audiophile look and feel. It has 7 channels with each delivering 200 watts per channel to all seven channels simultaneously when presented with an 8-ohm load.
🔌 To the right of the power switch, you’ll find seven RCA inputs and seven sets of speaker terminals. Also on the back side, there’s a receptacle for the power cord and a ground terminal.
You’ll have no problem getting all speakers connected to the amp thanks to its clearly labeled, color-coded terminals that manage 12-gauge speaker wire and 10-gauge or 8-gauge cables. It also accepts banana plugs for easy setup.
Monolith by Monoprice 7 is the best amplifier for Klipsch speakers. It delivers high-quality stereo sound in a wide variety of environments, and it can be easily connected to any Klipsch speaker thanks to the compatibility with 4 and 8-ohm speakers and a powerful amplifier.
Denon PMA-1600NE – Best Amplifier for Klipsch Speakers

🎼 PANDARANK | 8.7/10 |
Number of Channels | 2 |
Output Power | 70 W at 8 Ohms / 20 Hz to 20 kHz / 0.07% THD 140 W at 4 Ohms / 1 Hz / 0.7% THD |
Speaker Connectors: | 4 x Binding Post Pairs |
Wi-Fi / Bluetooth | No |
📢 The Denon PMA-1600NE Stereo Integrated Amplifier is a device used to amplify sound from your stereo system. This unit will work with most devices that have low-impedance inputs, making it a great choice for your Klipsch speakers.
🔊 This amp has two channels that are capable of producing a total output power of 140 watts per channel into 4 ohms, and 70 watts into 8 ohms.
🔌 There are two optical inputs and one coaxial input for connecting the digital sources. The Type-B USB input on the back of the amp is even more impressive — it’s compatible with streams and files up to 32-bit/384 kHz resolution. And you’ll likely get plenty of use out of the 1/4″ headphone jack and included remote, too.
The Denon PMA-1600NE is a very powerful amplifier that can easily power your Klipsch speakers, so it definitely deserves to be on the list of the best amplifiers for Klipsch speakers.
What to Look for When Choosing the Best Klipsch Speaker Amplifier
First of all, you need to decide what you will buy, a receiver or an amplifier. In short, the difference between them is in functionality, and in the number of channels. Amplifiers usually have 2 channels (left and right). Although there are multi-channel amplifiers.
Receivers, in addition to a built-in amplifier for 5, 7, or even 13 channels for speakers and a channel for a subwoofer, have video inputs, wireless control, and some other functions.
From this comes a simple conclusion, if you just need a stereo Hi-Fi system, it is better to take an amplifier, if you want to connect a home theater, of course, it is better to take an AV receiver.
Select an amplifier or receiver that can deliver continuous watts in accordance with the speaker’s continuous power handling rating. For example, the Klipsch RC-64 III is a center channel speaker with an 8-ohm impedance and rated at 200W continuous. So, any amplifier that delivers 200W continuous per channel at 8-ohm impedance with full frequency bandwidth (20Hz – 20,000Hz) is a good match.